
The maximum specific growth rates of both ammonium oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) were investigated under varying aerobic solids retention time (SRT(a)) and in the presence/absence of anoxic (alternating) conditions. Two bench SBRs, reactor R1 and R2, were run in parallel for 150d. Reactor R1 was operated in aerobic conditions while R2 operated in alternating anoxic/aerobic conditions. The feed (synthetic wastewater), temperature, hydraulic retention time and mixing were identical in both reactors. The SRT(a) in both reactors was, sequentially, set at four values: 5, 4, 3 and 2d. Kinetic tests with the biomasses from both reactors were carried out to estimate the maximum specific growth rates (μ(max)) at each tested SRT(a) and decay rates, in both aerobic and anoxic conditions. The kinetic parameters of nitrifier were estimated through the calibration of a two step nitrification-denitrification activated sludge model. The results point to a slightly higher μ(max,AOB) and μ(max,NOB) in alternating conditions, while both μ(max,AOB) and μ(max,NOB) were shown not to vary in the tested range of SRT(a) (from 2 to 5d) at 20°C. They were relatively high when compared to literature data: 1.05d(-1)<μ(max,AOB)<1.4d(-1) and 0.91d(-1)<μ(max,NOB)<1.31d(-1). The decay coefficients of both AOB and NOB were much higher in aerobic (from 0.22d(-1) to 0.28d(-1)) than in anoxic (0.04d(-1) to 0.16d(-1)) conditions both in R1 and R2, which explained the higher nitrification rates observed in the alternating reactor.
Quaternary Ammonium Compounds, Bioreactors, Bacteria, Nitrification kinetic parameters, Maximum specific growth rate, Resource-ratio theory, Aging theory, Solids retention time, Activated sludge modeling, Nitrogen Cycle, Nitrites, Water Pollutants, Chemical
Quaternary Ammonium Compounds, Bioreactors, Bacteria, Nitrification kinetic parameters, Maximum specific growth rate, Resource-ratio theory, Aging theory, Solids retention time, Activated sludge modeling, Nitrogen Cycle, Nitrites, Water Pollutants, Chemical
| selected citations These citations are derived from selected sources. This is an alternative to the "Influence" indicator, which also reflects the overall/total impact of an article in the research community at large, based on the underlying citation network (diachronically). | 70 | |
| popularity This indicator reflects the "current" impact/attention (the "hype") of an article in the research community at large, based on the underlying citation network. | Top 10% | |
| influence This indicator reflects the overall/total impact of an article in the research community at large, based on the underlying citation network (diachronically). | Top 10% | |
| impulse This indicator reflects the initial momentum of an article directly after its publication, based on the underlying citation network. | Top 10% |
