Alloy grain size is known to influence both the propagation path and the closure stress of surface fatigue cracks in many alloys. The general trend is for the path to be more tortuous and the closure stress to be larger, the larger the grain size. By use of Ti Al-4V and Al 7075-T6, the effects of grain size on the nondestructive detection of surface cracks which might arise from closure stress and path irregularity variables were evaluated. Titanium specimens were inspected using an acoustic harmonic generation technique, and it was discovered that the major source of harmonic signals was grain sized crystallographic cracks. Harmonic signals were larger during fatigue in an 8-µm compared to a 4-µm grain sized alloy, as there were more grain sized cracks in the large grain material. Crack closure was found to be extremely important in determining the reflected acoustic amplitude obtained in inspecting small (100–1000 µm) cracks in Al 7075-T6 using a critical angle technique. Average received amplitudes were an order of magnitude smaller for cracks at zero load than for those opened by a tensile stress. The scatter in the reflected amplitude was also large, apparently as the result of variations in the degree of the closure from crack to crack. For the 7075 material, the important effect of larger grain size was to increase the irregularity of the crack path, making the small cracks more visible acoustically at azimuthal angles not normal to the crack plane.