This thesis presents an investigation of braking system characteristics, brake system performance and brake system component design parameters that influence brake pedal force / displacement characteristics as ‘felt’ by the driver in a passenger car. It includes detailed studies of individual brake system component design parameters, operation, and the linear and nonlinear characteristics of internal components through experimental study and simulation modelling. The prediction of brake pedal ‘feel’ in brake system simulation has been achieved using the simulation modelling package AMESim. Each individual brake system component was modelled individually before combining them into the whole brake system in order to identify the parameters and the internal components characteristics that influence the brake pedal ‘feel’. The simulation predictions were validated by experimentally measured data and demonstrated the accuracy of simulation modelling. Axisymmetric Finite Element Analysis (using the ABAQUS software) was used to predict the behaviour of nonlinear elastomeric internal components such as the piston seal and the booster reaction disc which was then included in the AMESim simulation model. The seal model FEA highlighted the effects of master cylinder and caliper seal deformation on the brake pedal ‘feel’. The characteristics of the brake booster reaction disc were predicted by the FEA and AMESim simulation modelling and these results highlighted the importance of the nonlinear material characteristics, and their potential contribution to brake pedal ‘feel’ improvement. A full brake system simulation model was designed, prepared, and used to predict brake system performance and to design a system with better brake pedal ‘feel’. Each of the brake system component design parameters was validated to ensure that the braking system performance was accurately predicted. The critical parameter of brake booster air valve spring stiffness was identified to improve the brake ‘pedal ‘feel’. This research has contributed to the advancement of automotive engineering by providing a method for brake system engineers to design a braking system with improved pedal ‘feel’. The simulation model can be used in the future to provide an accurate prediction of brake system performance at the design stage thereby saving time and cost.