Powered by OpenAIRE graph
Found an issue? Give us feedback
addClaim

Control of leakage flows using periodic excitation

Authors: E. Kang; C. Tan; K. Breuer;

Control of leakage flows using periodic excitation

Abstract

Many flows can be characterized as leakage flows from high-pressure sides to lowpressure sides, resulting in increased inefficiency. This paper experimentally explores reducing leakage flows using periodic excitation. A synthetic jet actuator was used as the periodic excitation source in this experiment. The synthetic jet when excited periodically produces momentum but no net mass flux. Two speakers were used in these experiments as actuators: a high-frequency compression driver and a low-frequency woofer. The speaker exit cavity was covered with plates leaving only a small rectangular orifice exit for the synthetic jet. An airtight plexiglass box with a small gap was used to create a simulated leakage flow. The synthetic jet was then directed normally into the leakage flow to reduce the effective gap. The variables considered were as follows: the momentum flux ratio of the actuator over the leakage flow, the reduced frequency, the ratio of the height of the clearance gap over the thickness of the gap, and the ratio of the width of the orifice exit over the thickness of the gap. The ratio of discharge coefficient with actuation over the baseline discharge coefficient was used as the figure of merit. The results showed that the momentum flux ratio exerted a great influence on the leakage flow. A reduction of nearly 70 % in discharge coefficient ratio was achieved at a momentum flux ratio of 70. The reduced frequency was also found to have a significant effect, with the effectiveness of the actuator decreasing as the reduced frequency increased. The geometric parameters had little effect on the leakage flow. Thesis Supervisor: Kenneth S. Breuer Title: Visiting Associate Professor of Aeronautics and Astronautics

Related Organizations
  • BIP!
    Impact byBIP!
    selected citations
    These citations are derived from selected sources.
    This is an alternative to the "Influence" indicator, which also reflects the overall/total impact of an article in the research community at large, based on the underlying citation network (diachronically).
    2
    popularity
    This indicator reflects the "current" impact/attention (the "hype") of an article in the research community at large, based on the underlying citation network.
    Average
    influence
    This indicator reflects the overall/total impact of an article in the research community at large, based on the underlying citation network (diachronically).
    Average
    impulse
    This indicator reflects the initial momentum of an article directly after its publication, based on the underlying citation network.
    Average
Powered by OpenAIRE graph
Found an issue? Give us feedback
selected citations
These citations are derived from selected sources.
This is an alternative to the "Influence" indicator, which also reflects the overall/total impact of an article in the research community at large, based on the underlying citation network (diachronically).
BIP!Citations provided by BIP!
popularity
This indicator reflects the "current" impact/attention (the "hype") of an article in the research community at large, based on the underlying citation network.
BIP!Popularity provided by BIP!
influence
This indicator reflects the overall/total impact of an article in the research community at large, based on the underlying citation network (diachronically).
BIP!Influence provided by BIP!
impulse
This indicator reflects the initial momentum of an article directly after its publication, based on the underlying citation network.
BIP!Impulse provided by BIP!
2
Average
Average
Average
Upload OA version
Are you the author of this publication? Upload your Open Access version to Zenodo!
It’s fast and easy, just two clicks!