Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutants (HAP) study was conducted using the Carbon Injection System (the 4.0 MW Spray Dryer Absorber and the Pulse-Jet Fabric Filter). Testing also continued across the B&W/CHX Heat Exchanger this month as the effects of increased particulate loading are being studied. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. On September 13, 1996, the ECTC completed an independent test block for a third-party company, Air Purification Inc. (API). For this testing, the ECTC's staff (O&M and Testing) were contracted to conduct performance and validation testing across a new, integrated emissions control device, the Rotorfilter{trademark}. This testing was conducted for a thirty (30) day period simultaneously with the B&W/CHX test block. The HAP testing resumed as this third-party test block was completed. Testing in September at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC) included tests from the Pilot Trace Elements Removal (TER) test block as part of EPRI's overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions. The 1996 program is being performed on the 4.0 MW wet FGD pilot unit and the spray dryer/pulse jet fabric filter (SDA/PJFF) pilot units. The 1996 Trace Elements Removal (TER) test block is a continuation of the 1995 TER test block and will focus on up to five research areas, depending on experimental results. These areas are: (1) Mercury speciation methods; (2) Effect of FGD system operating variables on mercury removal; (3) Novel methods for elemental mercury control; (4) Catalytic methods for ...