The detectability of amplitude modulation in the absence of spectral cues provides a quantitative description of temporal resolution for steady-state signals with relatively small amplitude changes. Modulation thresholds for sinusoidally amplitude-modulated wideband noise were measured as a function of modulation frequency. The resulting ’’Temporal Modulation Transfer Function’’ (TMTF) shows a lowpass characteristic for modulation frequencies below about 800 Hz. The lowpass characteristic is extended up to approximately 2 kHz when the increment in average power produced by modulation is eliminated. The important parametric effects are summarized as follows: (1) TMTFs are independent of overall level, except at very low intensities; (2) the time constant indicated by the TMTF decreases as the center frequency of the band-limited, modulated noise is increased; (3) modulation thresholds generally decrease with increasing duration of modulation, particularly at low modulation frequencies; (4) when the carrier is gated for the duration of modulation, the TMTF shows a highpass segment at low modulation frequencies. Although the TMTFs are not directly consistent with the attenuation characteristic of a simple lowpass filter, a model which incorporates such a filter, with a time constant of 2.5 ms, describes the entire TMTF and also describes the modulation functions obtained with square-wave and pulse modulation. The wide bandwidth of initial filtering indicated by the model raises the important question of the role of peripheral filtering in determining the detectability of high-frequency modulation.