The paper presents a traction induction motor with an innovative rotor winding design. The winding of the rotor is almost identical to the armature winding in the dc traction motors, with the exception of commutator. Winding is double layered. The bars are insulated. Along the iron core bars are secured with wedges and in the winding outhang with bandages. The bars of the bottom layer in the winding outhang part near the iron core are bent radially in the direction of the shaft axis. On the winding outhang of the bottom layer an inner bandage is applied. On the winding outhang of the top layer an outer bandage is applied. All the ends of the bottom and top layers bars, on both sides of the rotor’s core, are connected together by ferrule. There is a ring placed on the shaft or on the coil support on one side of the rotor’s core. It is best if this ring is made of copper. The ring is characterized by mp tongues, which are distributed evenly along its circumference (p is number of winding pole pairs and m is number of rotor winding phases). Tongues are connected to equally uniformly placed ferrules. Bandages are made of carbon fibre or glass fibre tape.