AbstractDuring the 2003 Sanriku‐Minami earthquake, Japan, a flowslide was triggered on a slope of about 13.5º. The displaced landslide mass developed into a flowslide and deposited on a horizontal rice paddy after traveling approximately 130 m. To study the trigger and movement mechanisms of this landslide, field investigation and laboratory ring‐shear tests were performed. Field investigation revealed that the landslide originated from a fill slope, where a gully was buried for cultivation some decades ago, and shallow ground water was present. Undrained monotonic and cyclic ring‐shear tests on a sample (pyroclastic deposits) taken from the source area revealed that the soil is highly liquefiable, and its steady‐state shear strength can be little affected by overconsolidation. Using the seismic records of the earthquake, probable seismic loadings on the sliding surface were synthesized and applied to the samples in ring‐shear tests, which were performed under undrained or partially drained conditions. The undrained and partially drained tests revealed that shear failure can be triggered by the introduction of seismic loading and formation of excess pore‐water pressure. The generation of excess pore‐water pressure along with increase of shear displacement and the inhibited dissipation of excess pore‐water pressure due to the thickness of the saturated soil layer above the sliding surface probably enabled the continued post‐failure landsliding. Copyright © 2008 John Wiley & Sons, Ltd.