The severity of sour environments has been determined in accordance with the European Federation of Corrosion 16 and NACE MR0175/ISO 15156-2:2015 standards for carbon and low-alloy steels, based on the experimental results of sulfide stress cracking (SSC). However, the severity map obtained from SSC test results cannot be applicable to the hydrogen-induced cracking (HIC) susceptibility. In this study, the hydrogen permeability and crack area ratio of HIC under various pH and H2S partial pressures (pH2S) were measured to establish the link between the sour environmental severity and HIC susceptibility using grades X65 to X80 steels for linepipes. In addition, the hydrogen concentration at the location of the HIC was calculated by the finite element analysis. The results showed that the sour environmental severity map obtained from hydrogen permeation tests changes with time because the hydrogen permeability reached maximum values in the early stage and steady-state values in the later stage. Then, the HIC susceptibility did not correspond to the maximum permeability, but to the steady-state hydrogen permeability. In addition, the hydrogen content at the location of the HIC did not correspond to the maximum hydrogen permeability but corresponded to the steady-state hydrogen permeability, because HIC occurred in the center segregation part and the hydrogen atoms required a certain time to diffuse from the metal surface to the mid-thickness. These results suggest that the HIC susceptibility is dominated by the severity map obtained from the steady-state hydrogen permeability.