publication . Article . 2018

Experimental investigation of the axial strength of glued-in rods in cross laminated timber

Boris Azinović; Erik Serrano; Miha Kramar; Tomaž Pazlar;
Open Access English
  • Published: 18 Oct 2018 Journal: Materials and Structures, volume 51, issue 6 (issn: 1359-5997, eissn: 1871-6873, Copyright policy)
Abstract
This paper presents results from an experimental assessment of glued-in rods in cross laminated timber (CLT). For the purposes of the study more than 60 pull–pull tests were performed, where the specimens varied in terms of bonded-in length (from 80 to 400 mm), rod diameter (16–24 mm) and rod-to-grain angle (parallel and perpendicular). Several different failure modes that are not common for other applications of glued-in rods (e.g., a failure between CLT layers) were obtained for the analysed CLT specimens. It was found that these failure mechanisms can substantially influence the obtained ultimate tension loads. At the end, the experimental results were compar...
Persistent Identifiers
Subjects
Medical Subject Headings: sense organsgenetic structures
free text keywords: General Materials Science, Mechanics of Materials, Civil and Structural Engineering, Building and Construction, Glued-in rods, Cross laminated timber (CLT), Pull–pull experiment, Glued-in length, Rod-to-grain angle, Failure mechanisms in CLT, Solid mechanics, Perpendicular, Cross laminated timber, Composite material, Rod, Materials science
Funded by
EC| InnoRenew CoE
Project
InnoRenew CoE
Renewable materials and healthy environments research and innovation centre of excellence
  • Funder: European Commission (EC)
  • Project Code: 739574
  • Funding stream: H2020 | SGA-CSA
Validated by funder
Any information missing or wrong?Report an Issue