• Publicationsclose
• Research dataclose
• Research softwareclose
• 2018-2022close
• EPOS IP close

We exploit the data from five seismic transects deployed across the Pyrenees to characterize the deep architecture of this collisional orogen. We map the main seismic interfaces beneath each transect by depth migration of P-to-S converted phases. The migrated sections, combined with the results of recent tomographic studies and with maps of Bouguer and isostatic anomalies, provide a coherent crustal-scale picture of the belt. In the Western Pyrenees, beneath the North Pyrenean Zone, a continuous band of high density/velocity material is found at a very shallow level (~10 km) beneath the Mauleon basin and near Saint-Gaudens. In the Western Pyrenees, we also find evidence for northward continental subduction of Iberian crust, down to 50–70 km depth. In the Eastern Pyrenees, these main structural features are not observed. The boundary between these two domains is near longitude 1.3 °E, where geological field studies document a major change in the structure of the Cretaceous rift system, and possibly a shift of its polarity, suggesting that the deep orogenic architecture of the Pyrenees is largely controlled by structural inheritance. The PYROPE (Pyrenean Observational Portable Experiment) project was supported by the Agence Nationale de la Recherche (ANR) Blanc Programme (project PYROPE, ANR-09- BLAN-0229). We also acknowledge SISMOB, the French seismic mobile pool (a component of the RESIF consortium - http://seismology.resif.fr), for providing us with the seismological instrumentation for the temporary deployments. Field work has been also partially funded by the Spanish Ministry of Economy and Competitiveness through Project MISTERIOS (CGL2013-48601-C2-2-R). Peer reviewed

{"references": ["[1] Contribution to EPOS-IP WP10 STRAIN PRODUCT, Task 10.6 GNSS Products - Guidelines for DDSS Strain-rate derivation maps, A. Ganas, K. Chousianitis, version: 20 December 2016", "[2] Shen, Z.-K., M. Wang, Y. Zeng, and F. Wang, (2015), Strain determination using spatially discrete geodetic data, Bull. Seismol. Soc. Am., 105(4), 2117-2127, doi: 10.1785/0120140247.", "[3] Veis, G., Billiris, H., Nakos, B., and Paradissis, D. (1992), Tectonic strain in Greece from geodetic measurements, C. R. Acad. Sci. Athens, 67:129\u2014166.", "[4] Anastasiou D., Ganas A., Legrand J., Bruyninx C., Papanikolaou X., Tsironi V. and Kapetanidis V. (2019). Tectonic strain distribution over Europe from EPN data. EGU General Assembly 2019, Geophysical Research Abstracts, Vol. 21, EGU2019-17744-1"]} StrainTool allows the estimation of Strain Tensor parameters, on the Earth's crust, given a list of data points, aka points on the Earth along with their tectonic velocities. Also provided are output parameters related to the plotting of strains/strain-fields using the Generic Mapping Tools software (http://www.soest.hawaii.edu/gmt/ ). The algorithm to calculate horizontal strains (or strain rates) through interpolation of GNSS velocities is based on the Shen et al (2015) method (doi: 10.1785/0120140247) This software package has received funding from the European Union's Horizon 2020 research and innovation programme EPOS under grant agreement N°676564

During the last decades, the availability of Synthetic Aperture Radar (SAR) satellite missions, such as the ERS-1/2 and ENVISAT ones operating at C-band who have worked since 1992 to 2011, as well as the X-band COSMOSkyMed and TerraSAR-X constellations, up to the brand new Sentinel-1 mission, have strongly contributed to SAR data diffusion and popularity in the generation of different studies at different scales and in different research fields. One of the most popular SAR technique is the one referred to as Differential SAR Interferometry (DInSAR), which allows measuring with centimeter accuracy the Earth's surface deformation entity related to both natural and man-made hazards. Nowadays, with the increasing of SAR data availability provided by Sentinel-1 constellation of Copernicus European Program, which is composed by two twin satellites operating in C-band since 2014 and 2016, with a repeat pass of 6 days and with a global (i.e. worldwide) data acquisition policy, the SAR EO scenario is becoming more and more operational, thus mainly providing support for natural hazards monitoring. This allows, in theory, and disposing of sufficient computing power, the EO community to monitor, for instance, the deformation of every volcano or to obtain co-seismic displacement maps in a short time frame and anywhere in the world. Accordingly, in this work, we present a fully automatic and fast processing service for the generation of co-seismic displacement maps by using Sentinel-1 data. The implemented system is completely unsupervised and is triggered by the all significant (i.e. larger than a defined magnitude) seismic event registered by the online catalog as those provided by the United States Geological Survey (USGS) and the National Institute of Geophysics and Volcanology of Italy (INGV). The service has been specifically designed to operate for Civil Protection purposes. The generated DInSAR measurements are made available to the geoscience community through the EPOS Research Infrastructure and they will contribute to the creation of a global database of co-seismic displacement maps. Finally, it is worth noting that the developed system relies on widely common IT methods and protocols and is not specifically tied to a defined computing architecture, thus implying its portability, in view also of the European Commission Data and Information Access Services (DIAS) where satellite data (mainly Sentinel) and processing facilities are co-located to reduce the data transfer time during their processing.

Virtual Research Environments (VREs), also known as science gateways or virtual laboratories, assist researchers in data science by integrating tools for data discovery, data retrieval, workflow management and researcher collaboration, often coupled with a specific computing infrastructure. Recently, the push for better open data science has led to the creation of a variety of dedicated research infrastructures (RIs) that gather data and provide services to different research communities, all of which can be used independently of any specific VRE. There is therefore a need for generic VREs that can be coupled with the resources of many different RIs simultaneously, easily customised to the needs of specific communities. The resource metadata produced by these RIs rarely all adhere to any one standard or vocabulary however, making it difficult to search and discover resources independently of their providers without some translation into a common framework. Cross-RI search can be expedited by using mapping services that harvest RI-published metadata to build unified resource catalogues, but the development and operation of such services pose a number of challenges. In this paper, we discuss some of these challenges and look specifically at the VRE4EIC Metadata Portal, which uses X3ML mappings to build a single catalogue for describing data products and other resources provided by multiple RIs. The Metadata Portal was built in accordance to the e-VRE Reference Architecture, a microservice-based architecture for generic modular VREs, and uses the CERIF standard to structure its catalogued metadata. We consider the extent to which it addresses the challenges of cross-RI search, particularly in the environmental and earth science domain, and how it can be further augmented, for example to take advantage of linked vocabularies to provide more intelligent semantic search across multiple domains of discourse.

This dataset compiles SEM images, modelled isopach map and topographic profiles, and data of radiocarbon ages, parameters of Tephra2 and AshCalc codes of Holocene volcanic ashes of of Southern Puna and neighbouring areas (NW Argentina). SEM images detail differences among the Bolsón de Fiambalá, Cerro Blanco and Cueros de Purulla fallout ash deposits. Tephra2 code was used to simulate the ash fallout, and the AshCalc code to compare different methods for ash volume estimates associated with the 4.2 ka cal BP eruption of the Cerro Blanco Volcanic Complex. Topographic profiles are used to explain the secondary thickening of fallout ash deposits. Material suplementario (Figuras S1-S4 y Tablas S1-S4 del artículo Fernandez-Turiel, J.-L.; Perez-Torrado, F. J.; Rodriguez-Gonzalez, A.; Saavedra, J.; Carracedo, J. C., Rejas, M.; Lobo, A.; Osterrieth, M.; Carrizo, J. I.; Esteban, G.; Gallardo, J.; Ratto, N. (2019). The large eruption 4.2 ka cal BP in Cerro Blanco, Central Volcanic Zone, Andes: Insights to the Holocene eruptive deposits in the southern Puna and adjacent regions. Estudios Geológicos 75(1): e088. https://doi.org/10.3989/egeol.43438.515 MINECO, CGL2011-23307, Proyecto QUECA Peer reviewed

Mining, water-reservoir impoundment, underground gas storage, geothermal energy exploitation and hydrocarbon extraction have the potential to cause rock deformation and earthquakes, which may be hazardous for people, infrastructure and the environment. Restricted access to data constitutes a barrier to assessing and mitigating the associated hazards. Thematic Core Service Anthropogenic Hazards (TCS AH) of the European Plate Observing System (EPOS) provides a novel e-research infrastructure. The core of this infrastructure, the IS-EPOS Platform (tcs.ah-epos.eu) connected to international data storage nodes offers open access to large grouped datasets (here termed episodes), comprising geoscientific and associated data from industrial activity along with a large set of embedded applications for their efficient data processing, analysis and visualization. The novel team-working features of the IS-EPOS Platform facilitate collaborative and interdisciplinary scientific research, public understanding of science, citizen science applications, knowledge dissemination, data-informed policy-making and the teaching of anthropogenic hazards related to georesource exploitation. TCS AH is one of 10 thematic core services forming EPOS, a solid earth science European Research Infrastructure Consortium (ERIC) (www.epos-ip.org).

Background This data is camera images and nozzle pressure gauge voltage traces from rapid decompression shots at the LMU shock tube facility. This data is discussed in the "Materials and Methods" section of the paper "Standing Shock Prevents Propagation of Sparks in Supersonic Explosive Flows". Electric sparks and explosive flows have long been associated with each other. Flowing dust particles originate charge through contact and separate based on inertia, resulting in strong electric fields supporting sparks. These sparks can cause explosions in dusty environments, especially those rich in carbon, such as coal mines and grain elevators. Recent observations of explosive events in nature and decompression experiments indicate that supersonic flows of explosions may alter the electrical discharge process. Shocks may suppress parts of the hierarchy of the discharge phenomena, such as leaders. In our decompression experiments, a shock tube ejects a flow of gas and particles into an expansion chamber. We imaged an illuminated plume from the decompression of a mixture of argon and <100 mg of diamond particles and observe sparks occurring below the sharp boundary of a condensation cloud. We also performed hydrodynamics simulations of the decompression event that provide insight into the conditions supporting the observed behavior. Simulation results agree closely with the experimentally observed Mach disk shock shape and height. This represents direct evidence that the sparks are sculpted by the outflow. The spatial and temporal scale of the sparks transmit an impression of the shock tube flow, a connection that could enable novel instrumentation to diagnose currently inaccessible supersonic granular phenomena. Accessing Data The prefixes of the filenames correspond to the shot dates and times listed in table S1 of the paper. The "_camera.zip" files contains tiff images of the camera frames. The ".ixc" file in each zip lists camera settings in plain text. The ".dat" file contains the voltage measurement of the nozzle pressure gauge. Row 1 is the header, row 2 is the time in seconds, and row 3 is the voltage of the pressure gauge in Volts. The peak pressure in the header can be used to relate the voltage to pressure. This work was performed in part under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344, and Mission Support and Test Services, LLC, under Contract No. DE-NA0003624 with support from the Site-Directed Research and Development program, DOE/NV/03624--0956, and in part by the European Plate Observing Systems Transnational Access program of the European Community HORIZON 2020 research and innovation program under grant N 676564. CC acknowledges the support from the DFG grant CI 25/2-1 and from the European Community HORIZON 2020 research and innovation programme under the Marie Sklodowska Curie grant nr. 705619. LLNL-MI-817289. This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, complete- ness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific com- mercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes. {"references": ["C. Cimarelli, M. Alatorre-Ibargengoitia, U. Kueppers, B. Scheu, D. Dingwell, Experimen- tal generation of volcanic lightning. Geology 42, 79\u201382 (2014)"]}

Risultati della valutazione del corso "Praticare l'Open Science nelle Scienze della Terra e dell'ambiente"

The availability of GPS survey data spanning 22 years, along with several independent velocity solutions including up to 16 years of permanent GPS data, presents a unique opportunity to search for persistent (and thus reliable) deformation patterns in the Western Alps, which in turn allow a reinterpretation of the active tectonics of this region. While GPS velocities are still too uncertain to be interpreted on an individual basis, the analysis of range-perpendicular GPS velocity profiles clearly highlights zones of extension in the center of the belt (15.3 to 3.1 nanostrain/year from north to south), with shortening in the forelands. The contrasting geodetic deformation pattern is coherent with earthquake focal mechanisms and related strain/stress patterns over the entire Western Alps. The GPS results finally provide a reliable and robust quantification of the regional strain rates. The observed vertical motions of 2.0 to 0.5 mm/year of uplift from north to south in the core of the Western Alps is interpreted to result from buoyancy forces related to postglacial rebound, erosional unloading, and/or viscosity anomalies in the crustal and lithospheric root. Spatial decorrelation between vertical and horizontal (seismicity related) deformation calls for a combination of processes to explain the complex present-day dynamics of the Western Alps.