• Publicationsclose
• Research dataclose
• 2014-2023close
• Open Access close
• Вестник СибАДИ close

Introduction. Today there is an acute problem of increasing the number of accidents involving personal mobility devices (PMD). A sharp increase in these vehicles on public roads poses a threat to both vehicle drivers and pedestrians.Materials and methods. In this article, the results of the evaluation of the traffic flow characteristics of individual mobility devices under different conditions with the help of road section modelling are presented. The aim of the study is to obtain real values of traffic flow characteristics for further analysis and comparison, which in the future will reduce the accident rate with the participation of personal mobility devices. It is suggested a modelling method to be used to analyse the characteristics of traffic flow changing with the introduction of these devices. The objectives of the study are to analyse the number and types of accidents involving personal mobility devices, to identify conflict zones in the interaction of personal mobility devices with other road users, and to select the road environment to be modelled. Both positive and negative aspects of the introduction of PMD in everyday life are presented, and the main types and characteristics of personal mobility devices are briefly considered. Aimsun simulation software was used to create models of a road network section with the introduction of mobility devices in various traffic situations to evaluate their impact on traffic flow.Results. A road section model has been created to automate information processing and to consider different situations of PMD movement in an urban environment, which will allow further comparative analysis to select the safest conditions for the movement of these vehicles.Discussion and conclusions. The use of this modelling method will increase the speed of the study and help to determine most clearly how traffic flow characteristics change in the situations presented.

Article deals with the problem of mathematical modeling of mechanical interaction for the system “active volume of the soil layer – work tool of the compactor”. The problem is suggested to be solved in the framework of the modified approach of lumped parameters. Effective mathematical model was constructed and possibility of its numeric realization was discussed.

Рассмотрены варианты конечно-элементного моделирования армированных конструкций на примере железобетонной плиты с использованием стержневых, пластинчатых и объемных конечных элементов. Приведены результаты определения компонент напряженно-деформированного состояния для каждой расчетной схемы. Сделаны выводы о целесообразности использования вариантов конечно-элементных моделей для различного вида задач: пластинчатая аппроксимация при проектировании и комбинирование стержневых и объемных конечных элементов для научно-исследовательских задач. There are considered variants of finite-element modeling of reinforced constructions on the example of reinforced concrete slab using rod, plate and volume finite elements. The results determining a component of strained and deformed condition for each design scheme. There are drawn conclusions about the reasonability of using variants of finite element models for different type of tasks: plate approximation at design and combination of rod and volume finite elements for the research tasks.

In clause it is considered efficiency of complex influence of the additive of supersoftener С-3 and received on the basis of waste of pure quartz of highly disperse particles on characteristics of cellular concrete is considered. It is presented advanced technology manufactures of cellular concrete. Researchers have shown significant dense filling times highly disperse the particles, forming the new centers of the crystallization, representing itself as additional "reinforcing" of a concrete mix with products of its interaction. В статье рассмотрена эффективность комплексного воздействия добавки суперпластификатора С-3 и полученных на основе отходов чистого кварца высокодисперсных частиц на характеристики ячеистых бетонов Исследования показали значительное плотное заполнение пор высокодисперсными частицами, образовывающих новые центры кристаллизации, выступающих в качестве дополнительного «армирования» бетонной смеси с продуктами его взаимодействия.

The article considers the simulation model of workflow Earthmoving machinery, feature of the model is the presence of an automatic system cylinders deactivate of the engine depending on operating the machine load detail components of the model, obtained by simulation data built waveform, their analysis, evaluated the impact of the deactivated of cylinders in the working process of the unit.

Introduction. This paper presents the results of a study on the methods for calculating the capacity of level crossings. The purpose of writing this research paper is determine the best methodology for calculating the intervals in the main flows for the prevailing road conditions in the Russian Federation, that a new methodology to calculate capacity adapted to domestic road conditions would be developed in the future.Materials and methods. In recent decades of market relations in the Russian Federation, one can note a rapid increase in motorization in human settlements. The number in 550 vehicles per 1000 people in domestic entities is expected to have been increasde by 2025, which is significantly higher than the current level in European part of the Russian Federation. It is important to note that when the number of vehiclec is increasing, which level is about 80%, it is essential to increase road crossings capacity. Results. At the moment the methodology for calculating capacity and queue length is the same. It should be noted that the current models are not properly described in the domestic studies, but the calculations were made using models developed in the 1960s and 1970s.

The article details the mechanism of implementation of client-oriented approach in the transport and logistics companies through the introduction of intra-marketing programs. Described in detail the main stages of the implementation of this mechanism, the objectives and instruments. В статье подробно рассмотрен механизм внедрения клиенториентированного подхода в транспортно-логистических компаниях через внедрение программ внутриорганизационного маркетинга. Подробно описаны основные этапы реализации данного механизма, цели и инструменты.

В статье представлены результаты теоретических исследований, направленных на определение параметров системы виброзащиты рабочего места оператора дорожной уборочно-подметальной машины (ДУПМ). Теоретические исследования, проведенные на математической модели сложной динамической системы «возмущающие воздействия машина оператор», позволили установить зависимости между коэффициентами жесткости и вязкости упруговязких элементов подвесок кабины и кресла и уровнем динамических воздействий на рабочем месте оператора. The article presents the results of theoretical research aimed at determining the best parameters for the viscosity and stiffness of the cab suspension and seat. Theoretical studies of mathematical models of complex dynamic systems "disturbance machine operator" has allowed to establish the dependence between the coefficients of stiffness and viscosity of the viscoelastic suspension elements of the cabin and seats and the level of dynamic effects in the workplace of the operator.

Questions of development of strategy of a sustainable development of the oil company on the basis of use of resource approach and the concept of dynamic abilities in the context of features of the Russian economy are considered, classification of types of stability of the company, and also methodical approach to formation of system of the indicators characterizing economic social and ecological stability is offered. Рассмотрены вопросы разработки стратегии устойчивого развития нефтяной компании на основе использования ресурсного подхода и концепции динамических способностей в контексте особенностей российской экономики, предложена классификация видов устойчивости компании, а также методический подход к формированию системы показателей, характеризующих экономическую социальную и экологическую устойчивость.

Introduction. Hole details are quite widely used in structures of construction and road machines. The specialists apply boring for draft, semi-fair, and in some cases for fair processing of such surfaces. This type of processing is often followed by the negative nature of oscillatory processes that leads to decrease in accuracy and in the surface quality. The paper studies the possibility of the calculation method’s usage in oscillatory processes, which allows assigning the cutting modes by providing required output parameters.Materials and methods. The authors used the double-support beam as a design model of a boring cutter. The solution of the fluctuations’ modeling came down to definition of point movements, which corresponded to cutter top (points of application equally effective cutting forces). The authors made the definition of movements with use of Mor integrals. Therefore, the paper considered the impact of chip formation and separation due to perturbing forces.Results. The authors carried out the calculation of forces’ values in cutting with use of the degree dependences. Moreover, the authors accepted the formation’s frequency as the frequency of the perturbing influenced structure. The frequency of the chip formation was defined on the basis of estimated dependences, which connected parameters of the tool, the cut-off layer and modes of cutting. As a result, the author received the implementations of oscillatory processes and studied the influence of different factors on vibration amplitude.Discussion and conclusions. The authors make assessment of the received results’ adequacy by comparison with experimental data. The error doesn’t exceed 20%. The developed model considers geometrical parameters of the tool (a departure, plate corners, etc.), the modes of cutting both mechanical properties of the processed material and parameters of the chip formation. The model can be used both at design of boring operations and by optimization of the cutting modes for the purpose of productivity increase.